Why Choose Magic Shield Leather Graphene Ceramic Coating?
Magic Shield Leather Graphene Coating is the future of leather care. Unlike basic conditioners, this formula combines graphene + ceramic technology to clean, condition, and protect your leather while adding a natural, luxurious shine.
Restores color & suppleness
Creates a protective barrier against UV, spills & wear
Prevents cracking, fading & discoloration
Provides elite 5-year protection
Simple 3-Step Application:
1️⃣ Clean leather surface with included Leather Cleaner.
2️⃣ Apply Graphene Coating evenly using applicator pad.
3️⃣ Buff gently with microfiber — done!.
- Use a second towel for final buff to ensure no residue remains .
Steps
Before You Begin
Prepare Your Vehicle Interior:
Thoroughly vacuum the interior to remove dust and debris.
Clean all leather surfaces using Magic Shield Leather Cleaner to eliminate dirt, oils, and contaminants.
Prepare the Environment:
Park your car in a shaded, dust-free area with a temperature between 15°C and 24°C (60°F–75°F).
Prepare the Leather Coating
Shake the leather coating bottle thoroughly to ensure the formula is evenly mixed.
Replace the bottle cap with the included white tip for controlled application.
Apply 8–10 drops of the coating onto the suede applicator pad.
Apply the Leather Coating
Application Technique: Swipe the applicator pad in straight, overlapping lines (side-to-side or up-and-down) on one section of the leather at a time.
Keep Moisture Consistent: Add a few drops of coating to the suede applicator pad every 2–3 swipes to ensure even application.
Wait Before Buffing
Allow the coating to settle for 3–5 minutes before proceeding to buff.
Buff the Surface
Remove Excess Product: Use a clean, dry microfiber cloth to gently buff the leather.
Technique: Use light, circular motions to achieve a streak-free, smooth finish.
Inspect Thoroughly: Check for high spots or uneven areas and buff as needed.
Allow the Coating to Cure
Initial Curing: Let the coating sit undisturbed in a temperature-controlled environment for at least 4 hours.
Full Curing: Avoid water, debris, or physical contact with the surface for a full 24 hours to ensure proper bonding.
Reapply if Necessary: If high spots are visible after curing, correct them by lightly reapplying and buffing the area within 2 hours.
Tips for Best Results
Always work in a well-ventilated area.
Use clean and dry microfiber towels to prevent scratches or streaks.
Avoid applying the coating on hot surfaces or in direct sunlight.
You can get the following products
1 × Leather Cleaner Bottle (100ml / 3.4oz)
1 × Leather Graphene Coating Bottle (30ml / 1oz)
Applicator pad & microfiber towel
Instructions for use
Ongoing support via chat or email
Why Choose Magic Shield Leather Graphene Ceramic Coating?
Will it change the look of my leather?
No — it enhances natural shine without greasy residue.
How long does it last?
Up to 5 years of durable protection with proper care.
Is it safe on all leather?
Yes — suitable for all smooth leather surfaces (not suede or nubuck).
Does it prevent cracking?
Yes — creates a flexible shield that locks in moisture and resists UV damage.
Can I use it on steering wheels or bags?
Absolutely — perfect for seats, wheels, furniture, shoes & more.
Why Choose Magic Shield Leather Graphene Ceramic Coating?
Magic Shield Leather Graphene Coating is the future of leather care. Unlike basic conditioners, this formula combines graphene + ceramic technology to clean, condition, and protect your leather while adding a natural, luxurious shine.
Restores color & suppleness
Creates a protective barrier against UV, spills & wear
Prevents cracking, fading & discoloration
Provides elite 5-year protection
Simple 3-Step Application:
1️⃣ Clean leather surface with included Leather Cleaner.
2️⃣ Apply Graphene Coating evenly using applicator pad.
3️⃣ Buff gently with microfiber — done!.
- Use a second towel for final buff to ensure no residue remains .
Steps
Before You Begin
Prepare Your Vehicle Interior:
Thoroughly vacuum the interior to remove dust and debris.
Clean all leather surfaces using Magic Shield Leather Cleaner to eliminate dirt, oils, and contaminants.
Prepare the Environment:
Park your car in a shaded, dust-free area with a temperature between 15°C and 24°C (60°F–75°F).
Prepare the Leather Coating
Shake the leather coating bottle thoroughly to ensure the formula is evenly mixed.
Replace the bottle cap with the included white tip for controlled application.
Apply 8–10 drops of the coating onto the suede applicator pad.
Apply the Leather Coating
Application Technique: Swipe the applicator pad in straight, overlapping lines (side-to-side or up-and-down) on one section of the leather at a time.
Keep Moisture Consistent: Add a few drops of coating to the suede applicator pad every 2–3 swipes to ensure even application.
Wait Before Buffing
Allow the coating to settle for 3–5 minutes before proceeding to buff.
Buff the Surface
Remove Excess Product: Use a clean, dry microfiber cloth to gently buff the leather.
Technique: Use light, circular motions to achieve a streak-free, smooth finish.
Inspect Thoroughly: Check for high spots or uneven areas and buff as needed.
Allow the Coating to Cure
Initial Curing: Let the coating sit undisturbed in a temperature-controlled environment for at least 4 hours.
Full Curing: Avoid water, debris, or physical contact with the surface for a full 24 hours to ensure proper bonding.
Reapply if Necessary: If high spots are visible after curing, correct them by lightly reapplying and buffing the area within 2 hours.
Tips for Best Results
Always work in a well-ventilated area.
Use clean and dry microfiber towels to prevent scratches or streaks.
Avoid applying the coating on hot surfaces or in direct sunlight.
You can get the following products
1 × Leather Cleaner Bottle (100ml / 3.4oz)
1 × Leather Graphene Coating Bottle (30ml / 1oz)
Applicator pad & microfiber towel
Instructions for use
Ongoing support via chat or email
Why Choose Magic Shield Leather Graphene Ceramic Coating?
Will it change the look of my leather?
No — it enhances natural shine without greasy residue.
How long does it last?
Up to 5 years of durable protection with proper care.
Is it safe on all leather?
Yes — suitable for all smooth leather surfaces (not suede or nubuck).
Does it prevent cracking?
Yes — creates a flexible shield that locks in moisture and resists UV damage.
Can I use it on steering wheels or bags?
Absolutely — perfect for seats, wheels, furniture, shoes & more.
No — it enhances natural shine without greasy residue.
Up to 5 years of durable protection with proper care.
Yes — suitable for all smooth leather surfaces (not suede or nubuck).
Yes — creates a flexible shield that locks in moisture and resists UV damage.
Absolutely — perfect for seats, wheels, furniture, shoes & more.
Perfect For：
- Car seats & interiors .
- Leather steering wheels.
- Shoes, handbags, wallets.
- Leather furniture
Not For:
- Suede or nubuck.
- Application on wet or dirty surfaces.
Detailing Combo System
- Leather Cleaner – Deep clean & prep.
- Leather Graphene Coating – Protect & condition.
- Enjoy 5+ years of protection.
Four core highlights of Leather Graphene Ceramic Coating
Brings life back to tired, cracked, or faded leather.
1.Repairs dryness.
2.Removes dirt buildup.
3.Prevents cracking.
Long-Lasting 5-Year Protection
Stronger than traditional leather conditioners.
1.UV shield.
2.Scratch resistance.
3.Moisture barrier.
Deep Cleaning + Natural Conditioning
Keeps leather smooth, supple, and soft to the touch.
1.Removes embedded dirt.
2.Restores natural feel.
3.Non-greasy finish.
Creates a flexible shield that outperforms wax or oils.
1.Graphene durability.
2.Ceramic gloss.
3.Professional-grade protection.
Real Customer Results
Maintenance Kits
Maintain ceramic coating performance with premium care products that preserve gloss, hydrophobic protection, and shine.
Ceramic Coating Kits
Complete ceramic coating kits for durable paint protection, deep gloss, water beading, and lasting shine.
Preparation Kits
Prepare vehicle surfaces properly by removing contaminants for maximum coating bonding and durability.
My driver’s seat bolster usually gets worn out quickly from getting in and out. Since applying this coating, the leather feels more durable and slicker (in a good way), so there’s less friction. It’s definitely helping with wear and tear.
Professional detailer here. I offer this as a “Leather Shield” package. Customers love that it’s Graphene + Ceramic. It sounds high-tech and it delivers. It doesn’t leave that cheap shiny look that used car dealerships use. It leaves a natural, factory-matte finish.
I applied this to my new leather boots before winter. The salt and slush just wipe right off now. It didn’t change the color or texture of the leather, just made it waterproof. It’s like an invisible shield for your expensive shoes.
Great results on my car seats. The leather looks darker and healthier. I’m giving 4 stars because the 30ml bottle of coating is just enough for a standard 5-seater car. If you have a large SUV with 3 rows, buy two kits. But the protection is definitely worth it.
I used this on my beige leather sofa that was starting to look tired. The cleaner lifted the denim stains, and the ceramic coating brought back the rich color. It now repels spills! My kids spilled milk on it and it just beaded up. Amazing protection for furniture.